/ICOM IC-V86
ICOM IC-V862020-01-16T11:44:21+00:00

The Next Generation of the IC-V80, with 7 W Output Power and 1500 mW Audio

7 W output power plus new antenna provides 1.5 times* more communication distance

7 W output power plus new antenna provides 1.5 times* more communication distance

* Wide open space. Approximate, comparing the IC-V86 with the IC-V80. Communication range may differ depending on operating environment or weather conditions, etc. 7 W output power is only for theIC-V86.

1500 mW powerful audio and 1.5 times* higher sound pressure

* Approximate, comparing the IC-V86 with the IC-V80.

1500 mW powerful audio

Dust-protection, water resistance and a tough body
(IP54 and MIL-STD 810G)

19 hours* of long lasting battery life

No PC programming necessary, settings changeable from the radio*

Durable BNC type antenna connector

Made in Japan quality and reliability

Other Features

  • Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
  • Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
  • Integrated VOX function
  • 200 memory channels, 1 Call channel and 6 scan edges
  • Built-in CTCSS and DTCS encoder/decoder
  • Priority, program, memory, skip and tone scanning

Supplied accessories

  • BP-298/BP-264, battery pack*
  • BC-240, Desktop charger
  • BC-242, AC adapter
  • MB-124, belt clip
  • Antenna*

General

IC-V86

IC-U86

Frequency range
(TX/RX guaranteed range)
136–174 MHz
(EX Hi power TX :
144–160 MHz)
EXP1 : 400–472 MHz
(EX Hi power TX : 430–450 MHz)
EXP2 : 330–400 MHz
(EX Hi power TX : 335.4–380 MHz)
Type of emissions
F2D, F3E (FM, FM-N)
Number of channels
207 channels (200 memory channels, 1 call channel and 6 scan edges)
Antenna impedance
50Ω
Power supply requirement
7.5V DC
Operating temperature range
–20 ˚C to +60 ˚C, –4 °F to +140 °F
Frequency stability
±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)
Current drain TX
(EX Hi/Hi/Mid/Low)
1.6/1.4/1.0/0.5 A typical EXP1: 1.6/1.5/1.0/0.5 A typ.
EXP2: 1.6/1.4/0.9/0.5 A typ.
RX
(Max. audio)
450 mA typ. (INT SP),
200 mA typ. (EXT SP)
450 mA typ. (INT SP),
200 mA typ. (EXT SP)
Dimensions (W×H×D)
(Projections not included)
58.6 × 112 × 30.5 mm,
2.3 × 4.4 × 1.2 in
(with BP-298)
Weight (Approximate)
300 g, 10.6 oz
(with BP-298, FA-B57V)
290 g, 10.2 oz
(with BP-298, FA-B57U)

Transmitter

IC-V86

IC-U86

Output power
(EX Hi/Hi/Mid/Low)
7.0/5.5/2.5/0.5 W
5.5/4/2/0.5 W
Maximum frequency deviation
±5.0 kHz/±2.5 kHz (Wide/Narrow)
Spurious emissions
Less than –60 dB
External microphone connector
3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ

Receiver

IC-V86

IC-U86

Sensitivity
–124 dBm typical
EXP1: –121 dBm typical
EXP2: –123 dBm typical
Squelch sensitivity
–126 dBm typical
EXP1: –123 dBm typical
EXP2: –125 dBm typical
Selectivity (Wide/Narrow)
75 dB typical/
70 dB typical
70 dB typical/
68 dB typical
Intermodulation
65 dB typical
Audio output power Internal SP
1500 mW typical (with 8 Ω load)
External SP
550 mW typical (with 8 Ω load)
External speaker connector
3-conductor 3.5(d)mm (1/8″)/8Ω

Applicable IP Rating

Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)

 

BATTERY PACKS & CASE

BP-298

Rechargeable
Li-ion
2100 mAh (min.)
2250 mAh (typ.)

BP-299

Rechargeable
Li-ion
3050 mAh (min.)
3150 mAh (typ.)

BP-264

Rechargeable
Ni-MH
1400 mAh

CHARGERS

BC-240

Rapid charger for BP-298/BP-299

BC-191

Rapid charger for BP-264

BC-192

Regular charger
for BP-264

MULTI-CHARGERS

BC-214N*

For BP-298/BP-299

BC-197*

For BP-264

AC ADAPTERS

BC-242

(Use with BC-240)

BC-123S

(Use with BC-191)

BC-147S

(Use with BC-192)

BC-157S

(Use with BC-214N and BC-197)

SPEAKER-MICROPHONES

HM-168LWP

Waterproof

HM-158LA

HM-159LA

EARPHONE-MICROPHONES

HM-153LA

HM-166LA

BELT CLIP

MB-124

Same as supplied.

 

BROCHURE                               PDF

BASIC MANUAL                       PDF

ADVANCED MANUAL .          PDF

ICOM QATAR,  ALABAMA TRADING DOHA QATAR, www.alabama.qa  info@alabama.qa